Excavator Attachments in Washington - Our organization offers a large range of various replacement accessories and parts for many models of excavators, loaders, and bulldozers. Our professional Washington staff of parts experts are ready to help you find the components you desire.
A telehandler or telescopic handler is an equipment which is normally used in industrial and agricultural applications. It has the same appearance to a lift truck and even works in a similar way, although, the telehandler is more of a crane than a forklift. It has a telescopic boom which could lengthen forward and upward from the vehicle. The boom has the capability to fit one of several accessories including pallet forks, a bucket, a lift table or muck grab.
Pallet forks are the most common attachment for the telehandler. This particular machine is most often utilized for moving loads to and from places that a typical forklift would find inaccessible. Telehandlers are particularly useful for placing loads on rooftops for example, or for removing palletized cargo from with a trailer. A lot of the jobs which a telehandler can carry out will otherwise need a crane and this particular piece of equipment could be costly, not always time efficient and not practical.
The boom acts as a lever, raising and extending while bearing a load. Though there are rear counterweights, this may cause the telehandler to become more unstable. Thus, the greatest advantage of the telehandler is also its greatest limitation. As the working radius increases, the lifting capacity decreases. The working radius is defined as the distance between the front of the wheels and the center of the load.
The telehandler with a 5000 lb capacity for instance, with a retractable boom can safely lift as little as 400 lb at a fully extended boom at a low boom angle. Equivalent machines with a lift capacity of 5000 lbs and a retractable boom which could support as much as 10,000 lb with the boom raises to about 70 degrees. The operator has a load chart to help determine whether a certain lifting job can be done in an efficient and safe way. This chart takes into account the weight, height and the boom angle.
In order to monitor the telehandler, they come equipped together with a computer which uses sensors. These sensors work to alert the operator, with some being able to cut controls to certain inputs if the limits of the motor vehicle are exceeded. Some telehandler models are likewise outfitted along with front outriggers which are known as mobile cranes. These greatly extend the lifting capacity of the apparatus while it is stationary.
The Gradall models are able to move down narrow aisles and block in crowded landing locations with better accuracy and speed. Moreover, these units can also square-up lumber. The spacious and ergonomically designed machine cab offer a clear view of the job site. Telehandlers made by Gradall are equipped with different kinds of attachments so as to complete a wide range of jobs. There is basically nothing a Gradall Telehandler could not do, in order to complete the high performance level you require to get the job finished.
JLG Telehandlers
Known for their innovation, power and extreme versatility, JLG Telehandlers are main components in JLG's family line of all-wheel-steer telehandlers. Their 1 compact unit, along with their 5 full-sized models enable you as well as your company to tackle any jobsite challenge with efficiency and ease. These machines have the capabilities of improved overall visibility, a centered cab design and a high-boom pivot.
Each JLG telehandler can be outfitted with numerous attachments. More versatility, power and capacity are provided by JLG telehandlers. These machinery make an exceptional addition to any fleet. A lot of smaller companies choose to rent different models and brands before deciding to buy something so expensive. This is an excellent alternative to experiment with the telescopic handlers offered on the market and find the exact unit which would meet your requirements.
